More details later. 

Click on any picture for a bigger version, mostly 896x768

Finished	Finished2	This is where the exhaust goes, you might just get away without modding the front chassis rail	Another view of chassis mods
The original specalised engines 1.9CVH	Zetec in for initial checking front view	Zetec in for initial checking side view	Temporary brace across spaceframe to keep alignment
Original top rail cut away	Spaceframe removed and front of car stripped	Narrowed lower rail side replaced plus extra tube to weld above	Side of lower rail cut away
Narrowing lower rail	Front suspension bracket removed from lower rail	Bottom view of new top rail	Engine ready to be refitted
Engine ready to be refitted 2	Modified engine wiring loom so ecu connector and needed wires are inside car	Modified ecu bracket welded to plate that fits inside car on brake servo bolts	Original Zetec engine loom
Note new tube welded outside existing chassis tube and then original but away to clear exhaust	Clearance on cam cover	And another	Another view of modded chassis rails
New engine fitted 2	New engine fitted-1	Modification to engine mount to clear Zetec manifold	Repainted bulkhead, not perfect but i didn't want to strip any more of the car
Ecu fitted inside car	Another view	Newly powder coated spaceframe fitted	And another 2
Battery tray removed from this site, now in boot